Common commercial and Industrial door problems :


Dor and Dok systems Houston provides excellent customer service and dependable, professional repair and emergency service on all makes and models of rolling and sectional overhead doors, speciality doors, counter shutters, automatic doors, electric and handicap operators, dock levelers, dock shelters and more. Immediate Response 24/7 Emergency Service Servicing day or night 365 days .

Doors Making Noises:

The wheel tracks, hinges and bearings for a garage door need to be well lubricated in order to work consistently. Otherwise, the doors can become jammed or otherwise won’t function in the proper manner.

In addition, obstructions within the tracks sometimes can create garage door issues. However, these happen, professionals should be brought in to make adjustments and check that the bolts are properly tightened.

Spring Malfunctions:

Finely tuned springs are something that garage doors need to run smoothly, but they eventually either wear out over time or even break in some situations. This is where those experienced with such repairs can be invaluable.

Springs are supposed to be tightly wound in order to work properly. In far too many cases, people that have tried to replace springs on their own have gotten themselves injured.

Problems with Cables:

The danger with springs is alleviated when safety cables have been properly installed or maintained. They serve as a control mechanism for the springs, but they can also become frayed or broken.

In some cases, depending on the age of a garage in the DFW area, the structure may not even have these potential life-savers. Also, the possibility being unable to open a door with a car inside can quickly become a headache.

Track Misalignments:

Over time, the tracks that are part of the garage door can become warped, bent or otherwise misaligned. When this occurs, opening and closing the door can become impossible. Fixing this problem is sometimes possible for the average person, but doing so raises the risk of injury to an unacceptable level, which means setting someone experienced at garage door repair.

Sensor Issues :

Garage door issues related to sensors are something that develop regardless of whether residential garage door repair is needed or businesses in the Dallas Fort Worth market require similar services. In this case, a door that fails to open smoothly like involves a sensor problem, which is something that the professionals at All Pro Door Repair have experience in handling.

Visual inspection :

By making a visual inspection of the cables, springs, pulleys, brackets and rollers, any wear and tear can be detected. If you see that some garage door maintenance is in order, make sure you call the professionals at All Pro Door Repair. That’s because trying to adjust springs can be dangerous or could cause damage to any vehicles in the garage.

Regular Lubrication :

During what should be monthly inspections of your garage door, the tracks, hinges and rollers should be sprayed with a small amount of WD -40 or have a few drops of motor oil applied. All of this will keep them lubricated, which makes for smoother movement for the garage door.

The Balancing Door

A door out of adjustment is a problem, but testing beforehand can determine that issue. Beginning with a closed garage door, you should attempt to lift it for a few seconds. It should not only lift smoothly, but stay open roughly three to four feet above the floor as well.

Testing the Force Setting :

By holding the bottom of the garage door as it is closing, you’ll be able to determine if the force setting is moving without hesitation. If it doesn’t the setting may need to be adjusted downward.

Reversal Test :

Placing a piece of wood on the ground below the middle of the door and let the door come down. If it fails to immediately reverse after touching the wood, maintenance is needed.

Partitioning and noise reduction solutions :

Partition off workspace and contain noise with maximum performance noise control curtaining products. Fire safe and easily installed, our noise reduction solutions are ideal for: Architectural, commercial, and industrial settings, noisy equipment or machinery, In plant dividers, Isolation, booths for test equipment, Office cross talk panels, dividers for workstations, Movable screens, Liners for existing walls, Engine housing liners, Community noise problems, hard reflective surfaces.


Owned and operated in Houston, Call us today at Phone [ 512] 814 – 8840. 


Previous Next
Test Caption
Test Description goes like this